APEXC-GS1020 1000W 2000Wh Portable Power Station
We provide APEXC-GS1020 for household emergency backup, outdoor use, mobile work and selected small-site loads. Its 2000Wh LiFePO4 battery, 1000W pure sine wave output and multiple AC, USB and DC connections give you one practical portable power source.
Portable backup power built around the loads you actually use
Tell us which devices you need to support, their running power, starting surge and expected operating time. We help you check whether they fit the 1000W continuous output and available connections before quotation.
You can charge the unit from a 220-240VAC supply or connect a correctly matched photovoltaic source within the listed input range. Plug and socket configuration, product documents and commercial terms are confirmed for your destination market.
Where APEXC-GS1020 Fits
We position the product for selected portable and temporary loads. Runtime and starting performance depend on the actual device, battery state of charge and conversion losses.
Household Emergency Backup
Support selected refrigeration, lighting, routers and other household devices that remain within the output and starting-power limits.
Outdoor and Mobile Use
Power suitable projectors, lighting, mobile-office equipment and field-work tools without treating the IP20 enclosure as weatherproof.
Small-Shop Backup
Keep selected communications, lighting and low-power commercial equipment available during shorter interruptions.
Solar Charging
Use a correctly configured PV source within the 11-55V and 15A input limits after modules, connectors and charging conditions are confirmed.
Three Checks Before You Select a Portable Power Station
A capacity figure alone does not confirm that a product will run your equipment. We review power, energy and charging as one decision.
Running and Starting Load
We check continuous power and starting surge, especially for refrigerators, pumps, tools and heating or cooking devices.
Required Operating Time
We estimate practical support time from the actual load, usable stored energy and conversion losses rather than publishing one universal runtime.
AC or Solar Input
We confirm the available AC supply or PV configuration, connector path and charging window for the way you plan to use the product.
APEXC-GS1020 Technical Specifications
Use these values for first-round product selection. We confirm plug type, socket type, documentation and destination-market requirements before supply.
| Model | APEXC-GS1020 |
|---|---|
| Battery chemistry | LiFePO4 / LFP |
| Rated energy | 2000Wh |
| AC output waveform | Pure sine wave |
| AC output | 1000W; approximately 230VAC, 50/60Hz |
| UPS transfer time | No more than 20ms |
| USB output | 2 x USB-A, 5V 3A, maximum 15W per port; 1 x USB-C, 20W |
| DC output | 4 x DC5521, 12V +/-3%; listed maximum current 4A |
| PV input | 11-55V; maximum input current 15A |
| AC charging input | 800W; 220-240VAC, 50/60Hz |
| Operating temperatures | Discharge: -20 to 55 degrees C; charge: 0 to 50 degrees C |
| Cycle life | At least 70% remaining capacity after 8,000 cycles |
| Protection | High temperature, low temperature, over-discharge, over-charge, overload, short circuit and over-current |
| Enclosure and cooling | Metal enclosure; air cooling; IP20 |
| Dimensions | 310 x 135 x 200mm |
| Net weight | Approximately 19kg |
| Parallel operation | Not supported |
Protection and Responsible Use
We combine product protection functions with clear installation and load boundaries so you can present the product accurately in your market.
Protected Conditions
The system includes high- and low-temperature, over-charge, over-discharge, overload, short-circuit and over-current protection.
Controlled Environment
IP20 does not provide weather protection. Keep the unit away from rain, flooding, excessive dust and uncontrolled outdoor exposure.
Load Confirmation
A 1000W rating does not guarantee every motor, compressor, pump, tool or cooking appliance can start. Send us the device data first.
Market Configuration
We confirm plugs, sockets, packaging, documents, MOQ, lead time and warranty according to the destination and commercial agreement.
APEXC-GS1020 FAQ
Quick answers for product selection, charging and cooperation.
Can it run a refrigerator?
It may support a refrigerator when continuous power and compressor starting surge remain within the product limits. Send the appliance label or technical data so we can review it.
How long will the 2000Wh battery run my devices?
Runtime depends on the total load, starting behavior, conversion losses, battery state of charge and operating conditions. We calculate it from your actual device list.
Can I charge it from solar panels?
Yes, with a correctly matched photovoltaic source within the 11-55V and 15A input limits. PV modules, wiring, connectors and charging time must be confirmed.
Is APEXC-GS1020 waterproof?
No. Its IP20 enclosure is for protected indoor or controlled-use conditions and should not be exposed to rain, flooding or uncontrolled outdoor weather.
Does it support parallel operation?
No. Parallel operation is not supported. Select a different power or storage architecture when your load exceeds one unit’s capability.
Can you provide market-specific plugs and documents?
Tell us the destination country and expected quantity. We will confirm available plug and socket configurations, documents, packaging and commercial terms before quotation.
Tell Us What You Need to Power
Send the destination market, intended devices, running and starting power, expected operating time, charging method and quantity. We will confirm whether APEXC-GS1020 is the right portable power route.